Product Description1. The Camplux BD158 is an excellent choice for tiny houses, cabins, lodges, apartments, outdoor showers, bathhouses, campsites, and much more.
2. Could possibly be used in 5th wheels, RV, or campers if you have enough room for proper combustion air and venting and a flue pipe is installed additionally.
3. Ignition is provided by 2 D cell batteries which means electricity isn’t required to power the unit. (batteries not included)
4. The ideal low water pressure operating range for the Camplux BD158 is 3.0-10.0 PSI, works easily with great performance.
5. The operating propane gas pressure is 0.4PSI with maximum power output 41,000btu/hour.
6. The system also works with a 12-volt pump to get the desired pressure.
Specification Details Gas supply: Liquid Propane
Ignition: 2D Batteries Powered (Package not included)
Batteries Voltage: 3V DC
Battery run time: About 6 Months
Product weight: 15.6 Pounds
Product Dimension: 11.8 × 5.1 × 17.3 inches (W×D×H)
Water Flow Range: 0.6-1.58 GPM
Temp. Rise Range: 50~122 °F
Water Pressure Range: 3.0-110.0 PSI
Maximum power output: 41,000 BTU/hour
Gas Fitting: 3/8" Male Flare
Water Fittings: 1/2" G Thread Size
Easy to UseGet the instant portable gas hot water system that's easy to set up and use!
1. Hang the propane gas water heater using the handle provided, or install the water heater on the wall.
2. Connect the gas cylinder with the supplied gas hose and regulator.
3. Connect the shower hose and shower head to the hot water outlet.
4. Connect the water hose to the water inlet.
5. Insert 2 "D" cell batteries.
6. Enjoy instant hot water
What is included 1.58 GPM portable water heater
5 ft pre-installed gas regulator
5 ft ON/OFF shower kit
hardware packs
user manual 1.58 GPM portable water heater
1.2 GPM water pump
2 x 6.6 ft water hoses
22 ft cigarette lighter cable w/ switch
3.28 ft alligator clip cable
5 ft gas regulator
5 ft ON/OFF shower kit
hardware packs
user manual Setup in Minutes
Step 1: Wall-mounted Installation
Step 2: Connect Water Inlet
Step 3: Connect Pump Power
Step 4: Connect Water Outlet
Step 5: Connect Gas Supply
Step 6: Insert 2D Batteries
Q & A Q: Can it be used in high elevations?
A: Yes, but for areas above 2,000 feet, suggest checking if there is sufficient water supply
PS: For every 1,000 feet in elevation, the efficiency of the water heater will decrease by 10%
Q: How to power the water pump?
A: 12V DC required. Connect the alligator clip cable to the power supply's terminals or the cigarette lighter cable directly to the car's power
Q: Why is the shower leaking on first use?
A: Check the gasket connection with the shower head before use
Q: Why is the outgoing water so hot or not hot?
A: Water temperature varies from water inlet temperature and gas flow. This may cause a slight delay in temperature change. Please adjust in patience